MODEL ‘P’ & ‘E’ H-M BRIDGE PLUG

The Alpha H-M Bridge Plug is set using hydraulic power to set the top slips and then mechanical pull to complete the set. The Model P is for high pressure and temperature while the Model E sustains moderate temperature and pressure. The need for a mechanical setting tool does not exist because the setting mechanism is builtin. A ball is placed in the tubing string plugging off the built-in equalizing ports. Pressure is then applied to set the top slip and then mechanical pull is applied to finish the set. Releasing the tubing string from the plug is done by simply turning to the right. Full tubing I.D. is available after releasing from the plug allowing other equipment to extend through the end of the tubing string.
 
Features:

• Drillable
• Cast iron construction
• One piece slip
• Sets in any grade casing including P-110
• Metal back-up to prevent rubber extrusion
• For temporary or permanent service
• Ratcheting lock ring holds setting force
• Excellent for deviated wells

• SPECIFICATIONS

  Model "P" & "E" H-M Bridge Plug

  Casing		Plug	Setting Range
  OD	WT (Lbs/Ft)	OD	Min	Max
  3 1/5"	5.7 - 10.2	2.75	2.867	3.258
  4"	5.6 - 14	3.12	3.340	3.732
  4 1/2"	9.5 - 16.6	3.50	3.826	4.090
  5"	11.5 - 18	3.71	3.920	4.560
  5 1/2"	13 - 25	4.24	4.580	5.047
  5 3/4"	22.5 - 25.2	4.24	4.580	5.047
  6"	14 - 26	4.75	5.140	5.595
  6 5/8"	34	4.75	5.140	5.595
  6"	10.5 - 12	5.34	5.595	6.366
  6 5/8"	17 - 34	5.34	5.595	6.366
  7"	23 - 40	5.34	5.595	6.366
  6 5/8"	17 - 22	5.61	5.989	6.655
  7"	17 - 35	5.61	5.989	6.655
  7 5/8"	20 - 39	6.09	6.625	7.263
  8 5/8"	24 - 49	6.96	7.511	8.248
  9 5/8"	29.3 - 53.5	7.71	8.435	9.063
  10 3/4"	54 - 81	8.71	9.250	9.784
  10 3/4"	32.7 - 51	9.5	9.850	11.150
  11 3/4"	38 - 60	9.5	9.850	11.150
  13 3/8"	77 - 102	11.56	11.633	12.464
  13 3/8"	48 - 72	12.00	12.347	12.715

  Other sizes & connections available upon request.